View Full Version : Wanted 302 stuff
snowseeker
09-25-2003, 06:59 AM
I am looking for a set of nice looking valve covers for a 302, frost plug kit, distributor, and egr (smog) plugs for the heads.
And maybe a oil pan for a 65 mustang 302 if it isn't a rear sump.
i may have some bolts that fit the holes where you need the plugs. i had to buy some for the heads i bought this year and have some extras. or just bolt that tube back on, pinch one end off and lay a bead across it. not pretty, but functional.
1SLO5.0
09-25-2003, 08:37 PM
flip them upside down and bolt them back on
snowseeker
09-26-2003, 01:02 AM
I don't have the tube. How much for a couple bolts? Are you going to make me come out and drink all your beer again to get them? =)
let me see if i can get the size for you, then you can just go to fastenal and get some.
snowseeker
09-26-2003, 11:57 AM
It would be no problem for me to drive out and see my friends red. Unless you really don't want to sell yours?
1SLO5.0
09-26-2003, 12:35 PM
he just doesn't want you to come over
snowseeker
09-26-2003, 03:30 PM
LOL I'll bring some beer this time!! When can Derrall, stud, both mikes, Tim, and I come over?
1SLO5.0
09-26-2003, 03:58 PM
I'll have to see how I am feeling. I am sick right now. If I feel better tomarrow night I will be more than happy to drink Jim's alcohol!
all i have is miller high life. if you want something else you bring it. please email me to let me know for sure if you're coming or not everyone.
1SLO5.0
09-26-2003, 06:01 PM
7-7s is what we need!
snowseeker
09-27-2003, 09:38 AM
I have a frost plug kit now! Will be picking up the egr plugs tonight :). I still need a front sump pan and pick up tube, valce covers, and distributor (I like one wire point distributors!).
i have one of those here somewhere too. along with a set of pushrods from my old engine.
it'll be like a treasure hunt. :sheepd:
snowseeker
09-27-2003, 10:10 AM
=) I like looking threw car parts!! :)
REX331
09-27-2003, 08:23 PM
I have some Stock 83 Powered by ford Valve covers. They are collecting dust. I can bring em to GLD on the 9th or 18th of Oct.
Rex
snowseeker
09-28-2003, 06:49 AM
I have a distributor and egr plugs now! :)
Rex, I am looking for some aluminum ones. Something that looks kinda nice.
REX331
09-28-2003, 07:33 AM
they are the aluminum finned ones.
snowseeker
09-28-2003, 10:11 AM
How much?
snowseeker
09-28-2003, 11:52 AM
I also need a fuel pump ecentric yet. It is the cam that bolts to the actual cam in the motor. It drives the mech. fuel pump.
jdsgallops, did you find any yet?
REX331
09-28-2003, 04:52 PM
Free. Just been sitting in my garage collecting dust. Will have to pick them up or have someone get them at GLD on the 9th or 18th.
Rex
snowseeker
09-28-2003, 05:31 PM
Sounds good, What do you drive? Or PM me a cell phone number or something.
1SLO5.0
09-28-2003, 05:31 PM
That means you will have to come to RSD on the 9th Snowman!!!
REX331
09-28-2003, 05:33 PM
I drive a Black 83 Mustang with the number O/C 9400 on it.
Rex
Chuck
09-28-2003, 07:03 PM
Snow I have the eccentric here in my garage, you are welcome to it.
jdsgallops
09-28-2003, 07:45 PM
Nope I didn't find one, it must have been in my box of parts i gave away. :(: good thing Chuck has one.
shit snow!!! I have one of those in my "box 'o parts"
snowseeker
09-29-2003, 02:43 PM
Originally posted by Red
shit snow!!! I have one of those in my "box 'o parts"
I was thinking you did when I posted that last post. Why didn't we think of it when I was there?
Chuck or Red are you guys going to RSD on the 9th? It could be like a swap meet for me! :D:
Cheez Wiz
10-01-2003, 09:39 PM
I have a front sump pan that probably fits orange 65 Mustangs. Don't know how I'd get it to ya, tho.
snowseeker
10-02-2003, 07:39 AM
Would you happen to have the pick up tube too? Maybe you could run over to RSD the 9th and see soem racing?!?!
Cheez Wiz
10-02-2003, 06:20 PM
I have the tube also. I really doubt I'll get over there.
snowseeker
10-02-2003, 06:22 PM
Ok, how about just shippit the pan and tube than. Email me at snowseeker@charter.net With a price.
Thnaks
snowseeker
10-12-2003, 05:00 PM
Cheez wiz could you let me know if you could ship the pan and tube? Let me know how much for the two.
snowseeker
10-13-2003, 01:08 AM
Chuck, could you ship that eccentric please? How much you want for the eccentric and shipping?
How soon do you need it? I will be going to Plover the 29th.
snowseeker
10-13-2003, 12:22 PM
That would work! That would be great if you could do that for me!!
Are you going to bring your car?
1SLO5.0
10-13-2003, 12:46 PM
Originally posted by snowseeker
Are you going to bring your car?
:funnyhah:
I will be up north hunting. I won't need blaze orange so I will leave the car at home. I will get what you need and leave it at my parents house.
vBulletin® v3.7.3, Copyright ©2000-2012, Jelsoft Enterprises Ltd.