AN line

[bohn]

I need to run about 8ft of line from my pump to the regulator and about 3ft from that to the carb. Question is how hard is it to install AN fittings on the braided line? I know i need to order the line and all the fittings, but do i need anything special to put them together?

Darrel do you have any AN stuff in stock?

[1SLO5.0]

Installing the fittings is a pretty simple procedure. I have a bunch of hose and fittings in stock. I would suggest mapping out your entire fuel system so you know what fittings you will need. Let me know and I'll check and see how many of them I have in stock and how many I'll have to order.

[El nino]

you may want to check into things before you plum, I ve heard from various sources that you want to keep your regulator as close to the carb as you can, to keep your pressure consistant

[Jim]

not a problem putting the fittings on. chuck or i could stop over to show you how if you want.

[bohn]

I sat down last night and made a diagram of everything i'll need. I don't know where to mount the regulator yet, probaly on the front of the intake like i did on the bird. I might take you up on that offer Red next week. I'd like to wait till my new engine comes back from Ralph so i can have that in there first, so there won't be any interference with the lines.

PM me your number Red